Manufacturer: DTC |
Model: 2278EB |
TD# 234246 |
Interface....... EIDE (PIO 1-4) |
Bus Type........ VLB |
# of Chan/Devices |
2/4 |
IDE BIOS |
C8000-
CBFFF |
Cache |
N/A |
Int Conn |
2-40-Pin
EIDE |
Ext Conn |
Serial-1
Parallel |
Other Conn |
Serial-2
Game |
Xfer Async |
Up to
16.6MBS |
Xfer Sync |
None |
Sustained Xfer |
12MBS |
Primary IRQ |
15 |
Secondary IRQ |
12, 11, 14 |
DMA |
None |
Base I/O |
1F0h-1F7h |
Sec Base I/O |
170h-177h |
Mfg. Warranty |
3 Yrs |
Copyright ⌐ 1996, 1997 Tech
Data Corporation
Features
- VESA Local Bus (VL-Bus) operation to 50MHz.
- 32-bit host interface.
- DTC 2278D Plus Supports four (4) IDE/ATA devices:
- IDE Hard disk drives.
- IDE Tape drives.
- IDE CDROM drives (ATAPI Compatible).
- Enhanced Drive Parameter Table (EDPT) BIOS.
- Supports drives with capacities greater than 528
MBytes.
- Enhanced IDE Device Drivers:
- Auto Configuring.
- Support for ATA-2 drives.
- Support for Mode 4 IDE Drives (up to 16.6
MByte/sec).
- LBA (Logical Block Adressing) support.
- Multi Sector Transfer.
- Supports Secondary Port.
- Support for two 3.5" 720/1.44M or 5.25"
360/1.2M floppy disk drives.
- Two Enhanced Serial ports (NS16550 compatible).
- One Parallel Port (Bi-Directional, ECP, &EPP).
- One Game port.
W19-W24: Serial/Parallel Port Select
W7-W14: Serial/Parallel Port IRQ Setting
W18, W27, & W28: Enhanced IDE BIOS
Floppy Controller Enable
Floppy Auto Enable When Cable Is Attached
W6: Game Port Enable
W15 & W16: Parallel Port I/O
W2-W5: ECP DMA Channel Select
Drivers
For the latest drivers click HERE
Installation
[Main
Menu] [Hard Drives] [Controllers] [Tape Drives] [Glossary]